Additional information
| Weight | 20 lbs |
|---|---|
| Dimensions | 24 × 12 × 12 in |
Related Products
$25 Gift Certificate
$25 Gift certificate good towards anything we sell on our site!
Wraptor Rear Hinge Pivot
PRODUCT OVERVIEW
Replacement rear ivot for Wraptor 2000 and 2500.
Tire Deflator With Gauge
PRODUCT OVERVIEW
This 2 in 1 Professional grade heavy duty tire gauge & rapid deflator will allow you to quickly alternate between checking your tire pressure & deflating your tire to a desired PSI as many times as you like without ever having to remove the unit or having to carry 2 units with you to get the job done. Rapid deflation of approx 1Psi a second!
Replacement Travel Cover 2000
PRODUCT OVERVIEW
- This is a replacement travel cover for the Anza 2000 series tents.
Sliding Ladder Extension
PRODUCT OVERVIEW
- Aluminum sliding ladder can be used on any RTT model. The ladder is 78″ tall but you can also purchase the extension to add an additional 18″. You may need to re-drill the holes for the bracket mounts to set them for the correct width.
Wraptor to Ground Tent Bridge
PRODUCT OVERVIEW
This allows you to connect our Panamint 2000 and 2500 series ground tents to our Wraptor 2000 and 2500 series 270* awnings. The zippered side connects to the gimp on the Panamint tent. The velcro side connects to the Wraptor awning.
Cold Weather Cover
PRODUCT OVERVIEW
- Our Cold Weather cover is an excellent choice if you camp in the snow or very cold climates. It adds an extra layer of insulation to the tent as well as keeping the snow off your tent completely. Manufactured from high strength heat and cold resistant material, the cold weather cover will help shield your tent from heavy rain, snow, hale, or whatever other weather conditions you many encounter. You can fold the tent up with the hood intact which will help keep you tent dry on the inside!
- Reflective thermal hood made of 150T Rip stop polyester Oxford with aluminized coating, 2000mm W/P, UV resistant and flame retardant with taped seams. Quality YKK zippers used on doors & vent openings.
- Easy-to-use drawstring closure combined with multiple reinforced bungee attachment points provides a secure connection underneath tent.
RTT Extended Mounting Plates
PRODUCT OVERVIEW
If you are trying to mount your RTT to factory bars or Aero-style bars that are too thick, these longer mounting plates are the trick! They measure 4.25″ center to center. They are made from stainless steel. They use the same nuts and bolts as your original plates.
Reviews
There are no reviews yet.